Comparison

Single Place vs Multi-Place Hyperbaric Chamber

OxySoothe Editorial

The single-place versus multi-place question is usually framed as a throughput argument, and that framing is right but incomplete. Multi-place chambers deliver more sessions per day from a room, and they also change what a session is, how a room is staffed, and how the equipment behaves when something goes wrong. All three affect whether a clinic works.

What separates them

The two categories are defined by occupancy, not by pressure or by shell type. A single-place chamber holds one occupant. A multi-place chamber holds two or more, and the design differences follow from that.

  • Interior volume and layout. A multi-place chamber is a larger vessel, so the pressure differential is applied to more gas, compressor duty is higher, and the floor area and foundation requirements grow with it.
  • Oxygen delivery. A single-place chamber can serve one occupant from a shared source with a mask or hood. Multi-place chambers normally need an individually metered and individually regulated supply for each occupant, with an exhaust for each, because a shared feed cannot give one person more oxygen than another.
  • Occupant interaction. People in a shared chamber talk, move and can see each other, which changes the session for anyone who is anxious or self-conscious about it.
  • Pressure equalisation and supervision. With multiple occupants, the operator attention is divided, and one person experiencing difficulty affects everyone in the vessel.
  • Cost and complexity. The price difference is not linear. A two-place chamber generally costs more than twice a single-place unit, and always more than one.

The case for multi-place

Multi-place wins on throughput, and on something less easily measured: the economics of a room.

  • More sessions per day in the same footprint. Two or three occupants per cycle means more billable hours without more floor space, more power and more operator time.
  • A better unit cost per seat. Occupancy is usually the constraint on a chamber business, and the marginal cost of the second and third seat in an existing vessel is far lower than a second chamber in a second room.
  • Configuration. Multi-place hard-shell chambers are where the higher-pressure and pure-oxygen delivery configurations live, because that combination suits clinical programmes rather than occasional use.
  • Group bookings. Shared sessions have a clear price advantage for teams, groups and corporate buyers, which is often where the volume comes from.

The genuine drawbacks are worth stating plainly rather than listing as caveats. A multi-place chamber is a larger, more expensive, more complex installation with a bigger footprint and a longer commissioning period. If one occupant cannot complete a session, the whole group is affected. Ventilation, fire suppression and the combustible load in the room all scale with occupancy. And in the wrong market, a four-place chamber is an expensive machine that cannot be filled.

The case for single-place

Single-place chambers get dismissed as the small option, which is a mistake. There are situations where they are clearly the better commercial and operational answer.

  • Demand is one or two sessions a day. A multi-place chamber is capital nobody needs, and the money often earns more in a second location.
  • Privacy is a selling point. Some occupants will not sit in a shared chamber, and in a market where most clients pay individually that is a commercial constraint, not a preference.
  • The room cannot take the installation. Multi-place chambers need more floor area, more power, more ventilation and often a fire-rated enclosure.
  • Different session types need separating. A clinic running fixed programmes alongside short sessions often needs two chambers with different characteristics, and a soft-shell single-place unit alongside a hard-shell multi-place unit is a common pairing.
  • Deployment flexibility. A single-place chamber can often be relocated or sublet; a multi-place installation is effectively immovable.

Cost per session is the number to compute

The comparison that matters to a business is not the purchase price. It is the cost per delivered session over five years, and that calculation has more terms than most buyers expect.

  • Capital cost divided by usable sessions per day, calculated on occupancy rather than on seat count.
  • Operating cost: electricity for pressurisation, oxygen consumed per session multiplied by sessions, and any cooling or water treatment.
  • Operator time per session, including loading, monitoring and cleaning. Multi-place reduces this per session but does not remove it.
  • Full turnaround between occupants. A multi-place chamber has to be emptied and refilled, and the figure most often quoted is time to reach pressure rather than the whole cycle.
  • The consumables and wear items that cycle faster under more frequent operation.

A supplier who quotes cost per session without stating the occupancy assumption and the turnover time is quoting a number that cannot be compared with anyone else's. Both assumptions belong in the quotation.

Staffing, which is where the difference shows up operationally

Multi-place chambers are often sold on the strength of the sessions they can deliver, and the sessions are only deliverable if someone is present for all of them. That is not a small point, because the pressure of running several people through one vessel on a fixed timetable is a different job from running one person through it at a relaxed pace.

  • Loading and briefing time scales with the number of occupants, and it does not scale linearly — the first person takes longer than the fourth because the group arrives together.
  • One occupant with ear equalisation difficulty can hold up the whole group, which converts a single-person issue into a commercial one for everyone in the vessel.
  • Continuous monitoring attention has to be shared across the group, and an operator watching three people at once is watching each of them less closely.
  • Cleaning and turnaround between occupants consumes the room even when the chamber is empty, and the difference between a 15-minute and a 25-minute turnover is a whole extra session in a working day.
  • Multi-place chambers usually need a second person in the room, which is a real staffing cost that does not appear in the equipment price.

A single-place chamber inverts this. One operator can supervise one occupant without distraction, an individual problem affects nobody else, and the schedule can be extended rather than compressed when someone needs longer. For a clinical service that values attention per session, that is worth more than the throughput gain of a shared vessel.

The questions that settle it

  • What occupancy do you realistically expect on a weekday and at a weekend — separately?
  • What is the full session turnaround, from one occupant leaving to the next entering, not just the pressurisation time?
  • What is the oxygen consumption per occupant per session at the working pressure?
  • Is the room and its services rated for multi-occupancy operation, or only the vessel?
  • What happens to a session if one occupant needs to come out early?
  • What are the fire suppression and ventilation arrangements for the room at full occupancy?

So to answer the question in the title: multi-place is the stronger choice when you have reliable demand you could not otherwise serve and the room and the budget can carry the installation. Single-place is the stronger choice when demand is light, privacy is part of the offer, or the installation has to fit a constrained room. The mistake is the same in both directions — buying for the occupancy you hope for rather than the one you can forecast.

If you are working out which makes sense, send us your expected sessions per day, the mix of session lengths and the room you actually have, and we will model the cost per session for both options with the assumptions written out.

Tell us your needs

We can tailor a solution for you